Monday-Friday: 10am-7pm
Saturday: 10am-5pm
Sunday: Closed
Saturday: 10am-5pm
Sunday: Closed
|
||||||||||||
 | Hovering will show thumbnail Pop-Up Clicking will show section. |
| Hovering will show thumbnail Pop-Up Clicking will show section. |
|
Pricing applies to Internet orders only!!! Numbers shown are quantities used per assembly. Prices are based on a quantity of one (Each). Order the quantities needed for repair. *NOTE: Due to manufacturers pricing restrictions, discount pricing will be shown once parts have been added to your cart. |
| ORDER QTY |
REF. NO. |
PART NO. / DESCRIPTION | HLSM's PRICE |
CFORCE 800 XC |
| 01 | Q830-310000-40002 FRONT DIFFERENTIAL |
1,149.99* | 1 | |
| 02 | 0GR0-062203 BOLT M10.250 (M10X1.25X20) |
5.99* | 1 | |
| 03 | 0GR0-062204 WASHER107.5 (10X27.5X4) |
2.99* | 1 | |
| 04 | 9CR6-300201-10000 DRIVE SLEEVE, ENGINE |
59.99* | 1 | |
| 05 | 0800-062205 O-RING 25 (25X2) |
4.99* | 1 | |
| 06 | 0800-062204 OIL SEAL 350 (35X50X7) |
14.99* | 1 | |
| 07 | 30409-02500 BEARING (33005(25X47X17)) |
39.99* | 1 | |
| 08 | 0110-060011-0010 BOLT M8X28 (M8X28) |
9 | ||
| 09 | Q830-311002-00001 BEARING SEAT |
39.99* | 1 | |
| 10 | Q830-310006-10000 O-RING (55X2.5) |
5.99* | 1 | |
| 11-01 | Q830-310023-00100 ADJUSTING WASHER T=0.20 (T=0.20) |
4.99* | 1 | |
| 11-02 | Q830-310023-00200 ADJUSTING WASHER T=0.30 (T=0.30) |
4.99* | 1 | |
| 12-01 | Q830-311003-00200 ADJUSTING WASHER 32X25.4 T=2.20 (T=2.20) |
2.99* | 2 | |
| 12-02 | Q830-311003-01400 ADJUSTING WASHER 32X25.4 T=3.00 (T=3.00) |
1.99* | 2 | |
| 12-03 | Q830-311003-01300 ADJUSTING WASHER 32X25.4 T=2.90 (T=2.90) |
2.99* | 2 | |
| 12-04 | Q830-311003-01200 ADJUSTING WASHER 32X25.4 T=2.80 (T=2.80) |
1.99* | 2 | |
| 12-05 | Q830-311003-01000 ADJUSTING WASHER 32X25.4 T=2.60 (T=2.60) |
2.99* | 2 | |
| 12-06 | Q830-311003-00800 ADJUSTING WASHER 32X25.4 T=2.48 (T=2.48) |
2.99* | 2 | |
| 12-07 | Q830-311003-00100 ADJUSTING WASHER 32X25.4 T=2.10 (T=2.10) |
5.51* | 2 | |
| 12-08 | Q830-311003-00600 ADJUSTING WASHER 32X25.4 T=2.44 (T=2.44) |
2.99* | 2 | |
| 12-09 | Q830-311003-00500 ADJUSTING WASHER 32X25.4 T=2.42 (T=2.42) |
5.51* | 2 | |
| 12-10 | Q830-311003-00400 ADJUSTING WASHER 32X25.4 T=2.40 (T=2.40) |
2.99* | 2 | |
| 12-11 | Q830-311003-00300 ADJUSTING WASHER 32X25.4 T=2.30 (T=2.30) |
2.99* | 2 | |
| 12-12 | Q830-311003-01100 ADJUSTING WASHER 32X25.4 T=2.70 (T=2.70) |
2.99* | 2 | |
| 12-13 | Q830-311003-00900 ADJUSTING WASHER 32X25.4 T=2.50 (T=2.50) |
2.99* | 2 | |
| 12-14 | Q830-311003-00700 ADJUSTING WASHER 32X25.4 T=2.46 (T=2.46) |
5.51* | 2 | |
| 13 | 30105-040008410 CROSS SCREW, M4X8 (M4X8) |
1.99* | 2 | |
| 14 | 30409-03000 BEARING (32006(30X55X17)) |
39.99* | 1 | |
| 15 | Q830-3100B0 RING AND PINION, GEAR SET |
229.99* | 1 | |
| 16 | 30400-05500 BEARING (61911(55X80X13)) |
49.99* | 1 | |
| 17-01 | Q830-310015-00200 ADJUST SHIM 79.5X68 (T=0.20) |
2.99* | 1 | |
| 17-02 | Q830-310015-00600 ADJUST SHIM 79.5X68 (T=1.00) |
2.99* | 1 | |
| 17-03 | Q830-310015-00500 ADJUST SHIM 79.5X68 (T=0.50) |
2.99* | 1 | |
| 17-04 | Q830-310015-00400 ADJUST SHIM 79.5X68 (T=0.40) |
2.99* | 1 | |
| 17-05 | Q830-310015-00300 ADJUST SHIM 79.5X68 (T=0.30) |
2.99* | 1 | |
| 17-06 | Q830-310015-00100 ADJUST SHIM 79.5X68 (T=0.10) |
2.99* | 1 | |
| 18 | Q830-310014 DRIVE CLUTCH COLLAR |
22.99* | 1 | |
| 19 | Q830-310013 SPLINE BUSH |
39.99* | 1 | |
| 20 | 30800-05505 RETAINER 55 (55) |
1.99* | 1 | |
| 21 | 30400-03001 BEARING (6006) |
17.99* | 2 | |
| 22 | 30130-080010820 SCREW M80 (M8X10) |
1.09* | 1 | |
| 23 | Q830-310003 PIN SHAFT |
2.99* | 1 | |
| 24 | 0180-332100 OIL DRAIN BOLT, MAGNETIC(M14X1.25X12) (M14X1.25X12) |
6.99* | 1 | |
| 25 | 0180-011006 WASHER 14 (14) |
1.99* | 2 | |
| 26 | Q830-310007-10001 FRONT DIFFERENTIAL CASE |
1 | ||
| 27 | 0180-021008-0010 BOLT M14.252 (M14X1.25X12) |
1 | ||
| 28 | 0180-311001 OIL SEAL 24X38X8 (24X38X8) |
4.99* | 2 | |
| 29 | Q830-310005 SHIFT FORK |
10.99* | 1 | |
| 30 | Q830-310004 RACK |
17.99* | 1 | |
| 31 | Q830-310012-10000 O-RING 67.5*2 |
4.99* | 1 | |
| 32 | Q830-314000-10000 GEAR MOTOR (SUMITOMO PLUG) |
289.99* | 1 | |
| 33 | 0010-023008-0010 BOLT M68 (M6X18) |
3 | ||
| 34 | 0180-313002-10000 GEAR SHAFT(CENTER),DIFF |
14.99* | 1 | |
| 35 | Q830-313003-10000 FRONT CARRIER HOUSING |
79.99* | 1 | |
| 36 | 30906-0503000 PIN (5X30) |
1.09* | 1 | |
| 37 | Q830-313004 GEAR,CV SHAFT |
59.99* | 1 | |
| 38 | 0181-313011 WEARING RING |
2.99* | 2 | |
| 39 | 0180-313003-00004 BEVEL GEAR, DIFFERENTIAL |
22.99* | 2 | |
...(SURFACE PEENING TREATMENT, THE INNER HOLE TOLERANCE INCREASING) |
- | |||
| 40 | 0180-313006-00001 DRIVEN GEAR,DIFFERENTIAL |
39.99* | 1 | |
| 41 | 0180-313009-0010 SHIM |
2.99* | 1 | |
| 42 | Q830-310022 OIL GUARD |
2.99* | 1 | |
| 43-01 | 0180-313010-0002 ADJUST SHIM 57X40X0.3 (ADJUST GASKET 57X40X0.3) |
2.99* | 1 | |
| 43-02 | 0180-313010-0003 ADJUST SHIM 57X40X0.4 (ADJUST GASKET57X40X0.4) |
1.75* | 1 | |
| 43-03 | 0180-313010-0005 ADJUST SHIM 57X40X1.0 (ADJUST GASKET57X40X1.0) |
2.99* | 1 | |
| 43-04 | 0180-313010-0001 ADJUST SHIM 57X40X0.2 (ADJUST GASKET57X40X0.2) |
2.99* | 1 | |
| 43-05 | 0180-313010 ADJUST SHIM 57X40X0.1 (ADJUSTING WASHER 57X40X0.1) |
2.99* | 1 | |
| 43-06 | 0180-313010-0004 ADJUST SHIM 57X40X0.5 (ADJUST GASKET 57X40X0.5) |
2.99* | 1 | |
| 44 | Q830-313001-00001 DIFFERENTIAL END CAP |
59.99* | 1 | |
| 45 | 9010-290001 BOLT M82 (M8X1X22) |
1.09* | 8 | |
| 46-01 | Q830-310009-00200 ADJUST SHIM 54.5X43 (T=0.20) |
2.99* | 1 | |
| 46-02 | Q830-310009-00600 ADJUST SHIM 54.5X43 (T=1.00) |
2.99* | 1 | |
| 46-03 | Q830-310009-00500 ADJUST SHIM 54.5X43 (T=0.50) |
2.99* | 1 | |
| 46-04 | Q830-310009-00300 ADJUST SHIM 54.5X43 (T=0.30) |
2.99* | 1 | |
| 46-05 | Q830-310009-00100 ADJUST SHIM 54.5X43 (T=0.10) |
2.99* | 1 | |
| 46-06 | Q830-310009-00400 ADJUST SHIM 54.5X43 (T=0.40) |
2.99* | 1 | |
| 47 | Q830-310011 O-RING |
3.99* | 1 | |
| 48 | Q830-310008-00003 COVER, FRONT DIFFERENTIAL |
0.00* | 1 | |
| 49 | 0180-311004-0020 JOINT , BREATHER HOSE |
2.99* | 1 | |
| 50 | Q820-333008 CROSS BUSHING |
12.99* | 1 | |
| 51 | Q800-313001 PINION GEAR SHAFT |
3.99* | 2 |
| Powered by HLSM |
| Copyright © 2026 HLSM, Inc. All rights reserved. This material may not be published, broadcast, rewritten, or redistributed. For further information, contact HLSM, Inc. Version: 02/10/2026 |